A getting started guide to self-hosting Plausible Community Edition

**Contact**: - For release announcements please go to [GitHub releases.](https://github.com/plausible/analytics/releases) - For a question or advice please go to [GitHub discussions.](https://github.com/plausible/analytics/discussions/categories/self-hosted-support) ---

Install • Upgrade • Configure • Integrate • FAQ

--- ## Install Plausible Community Edition (or CE for short) is designed to be self-hosted through Docker. You don't have to be a Docker expert to launch your own instance, but you should have a basic understanding of the command-line and networking to successfully set it up. ### Requirements The only thing you need to install Plausible CE is a server with Docker. The server must have a CPU with x86_64 or arm64 architecture and support for SSE 4.2 or equivalent NEON instructions. We recommend using a minimum of 4GB of RAM but the requirements will depend on your site traffic. We've tested this on [Digital Ocean](https://m.do.co/c/91569eca0213) (affiliate link) but any hosting provider works. If your server doesn't come with Docker pre-installed, you can follow [their docs](https://docs.docker.com/get-docker/) to install it. To make your Plausible CE instance accessible on a (sub)domain, you also need to be able to edit your DNS. Plausible CE isn't currently designed for subfolder installations. ### Quick start To get started quickly, clone the [plausible/community-edition](https://github.com/plausible/community-edition) repo. It has everything you need to boot up your own Plausible CE server. console ```console $ git clone https://github.com/plausible/community-edition hosting Cloning into 'community-edition'... remote: Enumerating objects: 280, done. remote: Counting objects: 100% (146/146), done. remote: Compressing objects: 100% (74/74), done. remote: Total 280 (delta 106), reused 86 (delta 71), pack-reused 134 Receiving objects: 100% (280/280), 69.44 KiB | 7.71 MiB/s, done. Resolving deltas: 100% (136/136), done. $ ls hosting README.md clickhouse/ docker-compose.yml images/ plausible-conf.env reverse-proxy/ upgrade/ ``` In the downloaded directory you'll find two important files: - [docker-compose.yml](./docker-compose.yml) — installs and orchestrates networking between your Plausible CE server, Postgres database, Clickhouse database (for stats), and an SMTP server. - [plausible-conf.env](./plausible-conf.env) — configures the Plausible server itself. Full configuration options are documented [below.](#configure) Right now the latter looks like this: [plausible-conf.env](./plausible-conf.env) ```env BASE_URL=replace-me SECRET_KEY_BASE=replace-me ``` Let's do as it asks and populate these required environment variables with our own values. #### Required configuration First we generate the [secret key base](#secret_key_base) using OpenSSL: console ```console $ openssl rand -base64 48 GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` And then we decide on the [base URL](#base_url) where the instance would be accessible: plausible-conf.env ```diff - BASE_URL=replace-me + BASE_URL=http://plausible.example.com - SECRET_KEY_BASE=replace-me + SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` We can start our instance now but the requests would be served over HTTP. Not cool! Let's configure [Caddy](https://caddyserver.com) to enable HTTPS. #### Caddy > [!TIP] > For other reverse-proxy setups please see [reverse-proxy](./reverse-proxy) docs.
Don't need reverse proxy? --- If you're **opting out** of a reverse proxy and HTTPS, you'll need to adjust the Plausible service [configuration](./docker-compose.yml#L38) to ensure it's not limited to localhost (127.0.0.1). This change allows the service to be accessible from any network interface: [docker-compose.yml](./docker-compose.yml#L38) ```diff plausible: ports: - - 127.0.0.1:8000:8000 + - 8000:8000 ``` ---
First we need to point DNS records for our base URL to the IP address of the instance. This is needed for Caddy to issue the TLS certificates. Then we need to let Caddy know the domain name for which to issue the TLS certificate and the service to redirect the requests to. [reverse-proxy/docker-compose.caddy-gen.yml](./reverse-proxy/docker-compose.caddy-gen.yml) ```diff plausible: labels: - virtual.host: "example.com" # change to your domain name + virtual.host: "plausible.example.com" virtual.port: "8000" - virtual.tls-email: "admin@example.com" # change to your email + virtual.tls-email: "admin@plausible.example.com" ``` Finally we need to update the base URL to use HTTPS scheme. plausible-conf.env ```diff - BASE_URL=http://plausible.example.com + BASE_URL=https://plausible.example.com SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` Now we can start everything together. #### Launch console ```console $ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d [+] Running 19/19 ✔ plausible_db 9 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled ✔ plausible_events_db 7 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled ✔ plausible 7 layers [⣿⣿⣿⣿⣿⣿⣿] Pulled ✔ caddy-gen 8 layers [⣿⣿⣿⣿⣿⣿⣿⣿] Pulled [+] Running 5/5 ✔ Network hosting_default Created ✔ Container hosting-plausible_db-1 Started ✔ Container hosting-plausible_events_db-1 Started ✔ Container hosting-plausible-1 Started ✔ Container caddy-gen Started ``` It takes some time to start PostgreSQL and ClickHouse, create the databases, and run the migrations. After about fifteen seconds you should be able to access your instance at the base URL and see the registration screen for the admin user. > [!TIP] > If something feels off, make sure to check out the logs with docker compose logs and start a [GitHub discussion.](https://github.com/plausible/analytics/discussions/categories/self-hosted-support) 🎉 Happy hosting! 🚀 Next we'll go over how to upgrade the instance when a new release comes out, more things to configure, and how to integrate with Google and others! ## Upgrade Each new [release](https://github.com/plausible/analytics/releases/tag/v2.0.0) contains information on how to upgrade to it from the previous version. This section outlines the general steps and explains the versioning. ### Version management Plausible CE follows [semantic versioning:](https://semver.org/) `MAJOR.MINOR.PATCH` You can find available Plausible versions on [DockerHub](https://hub.docker.com/r/plausible/analytics). The default `latest` tag refers to the latest stable release tag. You can also pin your version: - plausible/analytics:v2 pins the major version to 2 but allows minor and patch version upgrades - plausible/analytics:v2.0 pins the minor version to 2.0 but allows only patch upgrades None of the functionality is backported to older versions. If you wish to get the latest bug fixes and security updates you need to upgrade to a newer version. New versions are published on [the releases page](https://github.com/plausible/analytics/releases) and their changes are documented in our [Changelog.](https://github.com/plausible/analytics/blob/master/CHANGELOG.md) Please note that database schema changes require running migrations when you're upgrading. However, we consider the schema as an internal API and therefore schema changes aren't considered a breaking change. We recommend to pin the major version instead of using `latest`. Either way the general flow for upgrading between minor version would look like this: console ```console $ cd hosting # or wherever you cloned this repo $ docker compose stop plausible [+] Running 1/1 ✔ Container hosting-plausible-1 Stopped $ docker compose rm plausible ? Going to remove hosting-plausible-1 Yes [+] Running 1/0 ✔ Container hosting-plausible-1 Removed $ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d [+] Running 8/8 ✔ plausible 7 layers [⣿⣿⣿⣿⣿⣿⣿] 0B/0B Pulled 6.4s ✔ 96526aa774ef Pull complete 0.4s ✔ 93631fa7258d Pull complete 0.6s ✔ 06afbc05374b Pull complete 1.6s ✔ 7ddeeadcce1e Pull complete 1.2s ✔ 724ddb9b523f Pull complete 2.8s ✔ 32581b0068b9 Pull complete 1.7s ✔ 4f4fb700ef54 Pull complete 2.0s [+] Running 4/4 ✔ Container hosting-plausible_events_db-1 Running 0.0s ✔ Container hosting-plausible_db-1 Running 0.0s ✔ Container hosting-plausible-1 Started 1.2s ✔ Container caddy-gen Running 0.0s $ docker images --filter=reference='plausible/analytics:*' REPOSITORY TAG IMAGE ID CREATED SIZE plausible/analytics v2.0 2b2735265a65 7 months ago 163MB plausible/analytics v1.5 5e1e0047953a 8 months ago 130MB $ docker rmi 5e1e0047953a Untagged: plausible/analytics:v1.5 Untagged: plausible/analytics@sha256:365124b00f103ac40ce3c64cd49a869d94f2ded221d9bb7900be1cecfaf34acf Deleted: sha256:5e1e0047953afc179ee884389e152b3f07343fb34e5586f9ecc2f33c6ba3bcaa ... ``` > [!TIP] > You can omit -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml if you are not using Caddy. Changes in major versions would involve performing a data migration (e.g. [v2.0.0](https://github.com/plausible/analytics/releases/tag/v2.0.0)) or some other extra step. ## Configure Plausible is configured with environment variables, by default supplied via [plausible-conf.env](./plausible-conf.env) [env_file.](./docker-compose.yml#L38-L39) > [!WARNING] > Note that if you start a container with one set of ENV vars and then update the ENV vars and restart the container, they won't take effect due to the immutable nature of the containers. The container needs to be **recreated.** #### Example configurations Here's the minimal configuration file we got from the [quick start:](#quick-start) plausible-conf.env ```env BASE_URL=https://plausible.example.com SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` And here's a configuration with some extra options provided: plausible-conf.env ```env BASE_URL=https://plausible.example.com SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz MAXMIND_LICENSE_KEY=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 MAXMIND_EDITION=GeoLite2-City GOOGLE_CLIENT_ID=140927866833-002gqg48rl4iku76lbkk0qhu0i0m7bia.apps.googleusercontent.com GOOGLE_CLIENT_SECRET=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 MAILER_NAME=Plausible MAILER_EMAIL=plausible@plausible.example.com DISABLE_REGISTRATION=invite_only ``` Here're the currently supported ENV vars: ### Required #### BASE_URL Configures the base URL to use in link generation, doesn't have any defaults and needs to be provided in the ENV vars plausible-conf.env ```env BASE_URL=https://plausible.example.com ``` > [!NOTE] > In production systems, this should be your ingress host (CDN or proxy). --- #### SECRET_KEY_BASE Configures the secret used for sessions in the dashboard, doesn't have any defaults and needs to be provided in the ENV vars, can be generated with OpenSSL: console ```console $ openssl rand -base64 48 GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` plausible-conf.env ```env SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz ``` > [!WARNING] > Don't use this exact value or someone would be able to sign a cookie with `user_id=1` and log in as the admin! ### Registration #### DISABLE_REGISTRATION Default: `true` Restricts registration of new users. Possible values are `true` (full restriction), `false` (no restriction), and `invite_only` (only the invited users can register). --- #### ENABLE_EMAIL_VERIFICATION Default: `false` When enabled, new users need to verify their email addressby following a link delivered to their mailbox. Please configure your server for SMTP to receive this email. You can find Plausible's SMTP configuration options under [below.](#email) If something went wrong you can run this command to verify all users in the database: console ```console $ cd hosting # or wherever you cloned this repo $ docker compose exec plausible_db psql -U postgres -h localhost -d plausible_db -c "UPDATE users SET email_verified = true;" ``` ### Web #### LISTEN_IP Default: `0.0.0.0` Configures the IP address to bind the listen socket for the web server. > [!WARNING] > Note that setting it to `127.0.0.1` in a container would make the web server unavailable from outside the container. --- #### PORT Default: `8000` Configures the port to bind the listen socket for the web server. --- ### Database Plausible uses PostgreSQL for storing user data and ClickhouseDB for analytics data. Use the following variables to configure them. --- #### DATABASE_URL Default: `postgres://postgres:postgres@plausible_db:5432/plausible_db` Configures the URL for PostgreSQL database. --- #### CLICKHOUSE_DATABASE_URL Default: `http://plausible_events_db:8123/plausible_events_db` Configures the URL for ClickHouse database. --- #### ECTO_IPV6 Enables Ecto to use IPv6 when connecting to the PostgreSQL database. Not set by default. plausible-conf.env ```env ECTO_IPV6=true ``` --- #### ECTO_CH_IPV6 Enables Ecto to use IPv6 when connecting to the ClickHouse database. Not set by default. plausible-conf.env ```env ECTO_CH_IPV6=true ``` ### Google For step-by-step integration with Google [see below.](#google-integration) #### GOOGLE_CLIENT_ID The Client ID from the Google API Console for your project. Not set by default. plausible-conf.env ```env GOOGLE_CLIENT_ID=140927866833-002gqg48rl4iku76lbkk0qhu0i0m7bia.apps.googleusercontent.com ``` --- #### GOOGLE_CLIENT_SECRET The Client Secret from the Google API Console for your project. Not set by default. plausible-conf.env ```env GOOGLE_CLIENT_SECRET=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 ``` ### IP Geolocation Plausible CE uses the country database created by [db-ip](https://db-ip.com/) for enriching analytics data with visitor countries. The database is shipped within the container image and country data collection happens automatically. Optionally, you can provide a different database. For example, you can use [MaxMind](https://www.maxmind.com) services and enable city-level geolocation: plausible-conf.env ```env BASE_URL=https://plausible.example.com SECRET_KEY_BASE=GLVzDZW04FzuS1gMcmBRVhwgd4Gu9YmSl/k/TqfTUXti7FLBd7aflXeQDdwCj6Cz MAXMIND_LICENSE_KEY=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 MAXMIND_EDITION=GeoLite2-City ``` --- #### IP_GEOLOCATION_DB Default: `/app/lib/plausible-0.0.1/priv/geodb/dbip-country.mmdb.gz` This database is used to lookup GeoName IDs for IP addresses. If not set, defaults to the [file](https://github.com/plausible/analytics/blob/v2.0.0/Dockerfile#L47) shipped within the container image. --- #### GEONAMES_SOURCE_FILE Default: [/app/lib/location-0.1.0/priv/geonames.lite.csv](https://github.com/plausible/location/blob/main/priv/geonames.lite.csv) This file is used to turn GeoName IDs into human readable strings for display on the dashboard. Defaults to the one shipped within the container image. --- #### MAXMIND_LICENSE_KEY If set, this ENV variable takes precedence over [IP_GEOLOCATION_DB](#ip_geolocation_db) and makes Plausible download (and keep up to date) a free MaxMind GeoLite2 MMDB of the selected edition. [See below](#maxmind-integration) for integration instructions. --- #### MAXMIND_EDITION Default: `GeoLite2-City` MaxMind database edition to use (only if [MAXMIND_LICENSE_KEY](#maxmind_license_key) is set) ### Email Plausible CE sends transactional emails e.g. account activation, password reset. In addition, it sends non-transactional emails like weekly or monthly reports. It uses SMTP with a [relay](./docker-compose.yml#L3-L5) by default. Alternatively, you can use other [services](https://hexdocs.pm/bamboo/readme.html#available-adapters) such as Postmark, Mailgun, Mandrill or Send Grid to send emails. #### MAILER_ADAPTER Default: `Bamboo.SMTPAdapter` Instead of the default, you can replace this with Bamboo.PostmarkAdapter, Bamboo.MailgunAdapter, Bamboo.MandrillAdapter or Bamboo.SendGridAdapter and add the appropriate variables. #### MAILER_EMAIL Default: `hello@plausible.local` The email id to use for as _from_ address of all communications from Plausible. #### MAILER_NAME The display name for the sender (_from_). --- #### SMTP_HOST_ADDR Default: [`mail`](./docker-compose.yml#L3-L5) The host address of your SMTP relay. #### SMTP_HOST_PORT Default: `25` The port of your SMTP relay. #### SMTP_USER_NAME The username/email in case SMTP auth is required on your SMTP relay. #### SMTP_USER_PWD The password in case SMTP auth is required on your SMTP relay. #### SMTP_HOST_SSL_ENABLED Default: `false` Configures whether SMTPS (SMTP over SSL) is enabled for SMTP connection, e.g. when you use port 465. #### SMTP_RETRIES Default: `2` Number of retries to make until mailer gives up. --- #### POSTMARK_API_KEY Enter your Postmark API key. > [!NOTE] > You also have to set the [MAILER_EMAIL](#mailer_email) variable which needs to be configured in PostmarkApps sender signatures. --- #### MAILGUN_API_KEY Enter your Mailgun API key. #### MAILGUN_DOMAIN Enter your Mailgun domain. #### MAILGUN_BASE_URI Default: `https://api.mailgun.net/v3` Mailgun makes a difference in the API base URL between sender domains from within the EU and outside. By default, the base URL is set to https://api.mailgun.net/v3. To override this you can pass https://api.eu.mailgun.net/v3 if you are using an EU domain. --- #### MANDRILL_API_KEY Enter your Mandrill API key. --- #### SENDGRID_API_KEY Enter your SendGrid API key. ## Integrate ### Google integration Integrating with Google either to get search keywords for hits from Google search or for imports from Universal Analytics can be frustrating. The following screenshot-annotated guide shows how to do it all in an easy way: just follow the Google-colored arrows!
View the guide --- Here's the outline of what we'll do: - [Set up OAuth on Google Cloud](#set-up-oauth-on-google-cloud) - [Select or create a Google Cloud project](#select-or-create-a-google-cloud-project) - [Register an OAuth application for a domain](#register-an-oauth-application-for-a-domain) - [Issue an OAuth client and key for that application](#issue-an-oauth-client-and-key-for-that-application) - [Verify the chosen domain on Google Search console](#verify-the-chosen-domain-on-google-search-console) - [Integrate with Google Search](#integrate-with-google-search) - [Enable APIs for Google Search integration](#enable-apis-for-google-search-integration) - [Link it with Plausible](#link-it-with-plausible) - [Import historical data from Universal Analytics](#import-historical-data-from-universal-analytics) - [Enable APIs for exports on Google Cloud](#enable-apis-for-exports-on-google-cloud) - [Import into Plausible](#import-into-plausible) --- ### Set up OAuth on Google Cloud #### Select or create a Google Cloud project Go to [Google Cloud console,](http://console.cloud.google.com/) for example, by clicking Go to console on [Google Cloud landing page.](https://cloud.google.com) If Google asks you to register, just do it. Once there, select a project that you want to use for Plausible OAuth app. If you don't have a project already, or if you want to isolate Plausible from all your other Google Cloud things, you should create a new project. ---
Here's how to create a new Google Cloud project In the Select a project pop-up, click New project Pick a descriptive name. Organizations don't matter. Once the project is created, select it and make sure all the other steps happen within that project. Google is tricky and sometimes switches you to a "default" project. And just like that, you have a new Google Cloud project! Please do make sure it stays selected.
--- #### Register an OAuth application for a domain Search for APIs & Services or something like that. Then in the left sidebar pick OAuth consent screen to begin the OAuth application registration. Choose External for the application type since the other one requires a Google Workspace and that costs money. On the next screen pick the name for your application and add your contact information. Scroll down -- skipping optional fields -- and type in your domain name and contact information (again). Skip the scopes. Pick yourself as the test user, Google might complain about it but it works. Click the final Save and continue and you have the OAuth application registered. #### Issue an OAuth client and key for that application Pick Credentials in the sidebar. Click + Create credentials dropdown and select OAuth client ID Pick Web application for the application type, type the name for the client, and add the redirect URL. That redirect URL should be `/auth/google/callback` on your Plausible instance's [BASE_URL](./plausible-conf.env#L1) Copy these to your [plausible-conf.env](./plausible-conf.env) and make sure to recreate the `plausible` container since the ENV vars provided on startup get "baked in" plausible-conf.env ```env GOOGLE_CLIENT_ID=974728454958-e1vcqqqs6hmoc394663kjrkgfajrifdg.apps.googleusercontent.com GOOGLE_CLIENT_SECRET=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 ``` console ```console $ docker compose stop plausible [+] Running 1/1 ⠿ Container hosting-plausible-1 Stopped $ docker compose rm plausible ? Going to remove hosting-plausible-1 Yes [+] Running 1/0 ⠿ Container hosting-plausible-1 Removed $ docker compose -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml up -d [+] Running 4/4 ✔ Container hosting-plausible_events_db-1 Running 0.0s ✔ Container hosting-plausible_db-1 Running 0.0s ✔ Container hosting-plausible-1 Started 1.2s ✔ Container caddy-gen Running 0.0s [+] Running 3/3 ⠿ Container hosting-plausible_db-1 Healthy 0.5s ⠿ Container hosting-plausible_events_db-1 Healthy 0.5s ⠿ Container hosting-plausible-1 Started $ docker compose exec plausible sh -c 'echo $GOOGLE_CLIENT_ID' 974728454958-e1vcqqqs6hmoc394663kjrkgfajrifdg.apps.googleusercontent.com ``` > You can omit -f docker-compose.yml -f reverse-proxy/docker-compose.caddy-gen.yml if you are not using Caddy #### Verify the chosen domain on Google Search console Did you notice that during OAuth application registratation there was a note about Authorized URLs saying that they need to be verified? Nevermind, we are doing it now. Start by navigating to [Google Search Console page.](http://search.google.com/u/1/search-console/welcome) Once there, either ensure that you've already verified your domain by checking the properties in the Select property dropdown on the left or pick one of the two ways to verify it. I only have screenshots for the "Domain" type so that's what I'm picking. Whichever you pick, just follow the instruction in the pop-up, they are good. Success looks like this. With that, you are ready to integrate Plausible with Google Search and import Universal Analytics data. You can do both, neither, and anything in between. ### Integrate with Google Search #### Enable APIs for Google Search integration Go back to [Google Cloud,](https://console.cloud.google.com) ensure you have the correct project selected, and search for Google Search Console API Enable it. #### Link it with Plausible Go to the site settings on your Plausible dashboard. In the settings select Search Console and press Continue with Google > If you see a warning instead, that means you haven't set the GOOGLE_CLIENT_ID and GOOGLE_CLIENT_SECRET environment variables [correctly.](#issue-an-oauth-client-and-key-for-that-application) Choose the account that you added as the test user. Trust our own application. Allow viewing Search Console data. Pick the property from Search Console. And now we should be able to drilldown into Google search terms like on [plausible.io](https://plausible.io/plausible.io/referrers/Google?source=Google) ### Import historical data from Universal Analytics #### Enable APIs for exports on Google Cloud Go back to [Google Cloud,](https://console.cloud.google.com) ensure you have the correct project selected, and search for Google Analytics API Enable it. Next search for Google Analytics Reporting API And enable it. #### Import into Plausible Go to the site settings on your Plausible dashboard. In the General settings section scroll down to Data Import from Google Analytics and press Continue with Google button. > If you see a warning instead, that means you haven't set the GOOGLE_CLIENT_ID and GOOGLE_CLIENT_SECRET environment variables [correctly.](#issue-an-oauth-client-and-key-for-that-application) Choose the account that you added as the test user. Trust our own application. Pick the view to import and then follow the Plausible directions. You'll receive an email once the data is imported. ---
### MaxMind integration To use MaxMind you need to create an account [here.](https://www.maxmind.com/en/geolite2/signup) Once you have your account details, you can add [MAXMIND_LICENSE_KEY](#maxmind_license_key) and [MAXMIND_EDITION](#maxmind_edition) environmental valiables to your [plausible-conf.env](./plausible-conf.env) and the databases would be automatically downloaded and kept up to date. Note that using city-level databases like MaxMind's GeoLite2-City requires ~1GB more RAM. ## FAQ
How do I access Plausible from terminal? You can starts an Interactive Elixir session from within the `plausible` container: console ```console $ cd hosting # or wherever you cloned this repo $ docker compose exec plausible bin/plausible remote ``` ```elixir iex> Application.get_all_env :plausible [ {PlausibleWeb.Endpoint, [ live_view: [signing_salt: "f+bZg/crMtgjZJJY7X6OwIWc3XJR2C5Y"], pubsub_server: Plausible.PubSub, render_errors: [ view: PlausibleWeb.ErrorView, layout: {PlausibleWeb.LayoutView, "base_error.html"}, accepts: ["html", "json"] ] # etc. # use ^C^C (ctrl+ctrl) to exit ```
How do I access ClickHouse from terminal? You can starts a `clickhouse client` session from within the `plausible_events_db` container: console ```console $ cd hosting # or wherever you cloned this repo $ docker compose exec plausible_events_db clickhouse client --database plausible_events_db ``` ```sql :) show tables -- ┌─name───────────────────────┐ -- │ events │ -- │ events_v2 │ -- │ imported_browsers │ -- │ imported_devices │ -- │ imported_entry_pages │ -- │ imported_exit_pages │ -- │ imported_locations │ -- │ imported_operating_systems │ -- │ imported_pages │ -- │ imported_sources │ -- │ imported_visitors │ -- │ ingest_counters │ -- │ schema_migrations │ -- │ sessions │ -- │ sessions_v2 │ -- └────────────────────────────┘ :) exit -- Bye ```
How do I access PostgreSQL from terminal? You can starts a `psql` session from within the `plausible_db` container: console ```console $ cd hosting # or wherever you cloned this repo $ docker compose exec plausible_db psql -U postgres -h localhost -d plausible_db ``` ```sql plausible_db=# \d -- Schema | Name | Type | Owner -- --------+------------------------------------------------+----------+---------- -- public | api_keys | table | postgres -- public | api_keys_id_seq | sequence | postgres -- public | check_stats_emails | table | postgres -- public | check_stats_emails_id_seq | sequence | postgres -- public | create_site_emails | table | postgres -- public | create_site_emails_id_seq | sequence | postgres -- public | email_activation_codes | table | postgres -- public | email_activation_codes_id_seq | sequence | postgres -- public | email_verification_codes | table | postgres -- public | enterprise_plans | table | postgres -- public | enterprise_plans_id_seq | sequence | postgres -- public | feedback_emails | table | postgres -- public | feedback_emails_id_seq | sequence | postgres -- public | fun_with_flags_toggles | table | postgres -- public | fun_with_flags_toggles_id_seq | sequence | postgres -- public | funnel_steps | table | postgres -- public | funnel_steps_id_seq | sequence | postgres -- public | funnels | table | postgres -- public | funnels_id_seq | sequence | postgres -- public | goals | table | postgres -- public | goals_id_seq | sequence | postgres -- public | google_auth | table | postgres -- public | google_auth_id_seq | sequence | postgres -- public | intro_emails | table | postgres -- public | intro_emails_id_seq | sequence | postgres -- public | invitations | table | postgres -- public | invitations_id_seq | sequence | postgres -- public | monthly_reports | table | postgres -- public | monthly_reports_id_seq | sequence | postgres -- public | oban_jobs | table | postgres -- public | oban_jobs_id_seq | sequence | postgres -- public | oban_peers | table | postgres -- public | plugins_api_tokens | table | postgres -- public | salts | table | postgres -- public | salts_id_seq | sequence | postgres -- public | schema_migrations | table | postgres -- public | sent_accept_traffic_until_notifications | table | postgres -- public | sent_accept_traffic_until_notifications_id_seq | sequence | postgres -- public | sent_monthly_reports | table | postgres -- public | sent_monthly_reports_id_seq | sequence | postgres -- public | sent_renewal_notifications | table | postgres -- public | sent_renewal_notifications_id_seq | sequence | postgres -- public | sent_weekly_reports | table | postgres -- public | sent_weekly_reports_id_seq | sequence | postgres -- public | setup_help_emails | table | postgres -- public | setup_help_emails_id_seq | sequence | postgres -- public | setup_success_emails | table | postgres -- public | setup_success_emails_id_seq | sequence | postgres -- public | shared_links | table | postgres -- public | shared_links_id_seq | sequence | postgres -- public | shield_rules_ip | table | postgres -- public | site_imports | table | postgres -- public | site_imports_id_seq | sequence | postgres -- public | site_memberships | table | postgres -- public | site_memberships_id_seq | sequence | postgres -- public | site_user_preferences | table | postgres -- public | site_user_preferences_id_seq | sequence | postgres -- public | sites | table | postgres -- public | sites_id_seq | sequence | postgres -- public | spike_notifications | table | postgres -- public | spike_notifications_id_seq | sequence | postgres -- public | subscriptions | table | postgres -- public | subscriptions_id_seq | sequence | postgres -- public | totp_recovery_codes | table | postgres -- public | totp_recovery_codes_id_seq | sequence | postgres -- public | users | table | postgres -- public | users_id_seq | sequence | postgres -- public | weekly_reports | table | postgres -- public | weekly_reports_id_seq | sequence | postgres plausible_db=# exit ```